The W10 ultra-wideband portable drone detector combines RF signal detection, spectrum display, and Remote ID reception in a compact handheld device. With a receiving range of 300MHz–13.4GHz and a weight of approximately 450g including the battery and antennas, it provides a portable option for drone signal monitoring.

Its built-in signal library supports the detection of more than 100 drone types, according to the product specification. Actual recognition depends on the signal, supported model, and installed firmware.

Wideband Coverage for Diverse Drone Signals

The W10 scans across 300MHz–13.4GHz with a minimum frequency step of 1MHz. It displays drone type, signal frequency, and signal strength, giving users a view of detected signals alongside real-time spectrum information.

The supported signal library includes selected DJI and Autel models, analog FPV systems, and digital FPV platforms such as Walksnail, HDZero, Artosyn ArtLynk, and OpenIPC. Specific model compatibility should be confirmed before purchase.

Detection Range with Defined Conditions

The specification lists a detection range of 500m–5km, depending on the frequency band, drone transmitter, and operating environment. The maximum range of up to 5km applies under open, unobstructed line-of-sight conditions with a representative transmitter operating at full power; the specification identifies a 5W analog FPV transmitter as an example.

Receiver sensitivity can reach −101dBm for a 20MHz-bandwidth OFDM digital video signal. Sensitivity differs for other signal types.

These figures describe performance under specified conditions rather than a guaranteed detection distance for every drone. Buildings, terrain, interference, and transmitter characteristics can affect field performance.

Remote ID Reception

In addition to RF signal detection, the W10 supports Remote ID reception through 2.4GHz Wi-Fi, 5.8GHz Wi-Fi, and 2.4GHz Bluetooth.

Remote ID reception depends on the aircraft transmitting a compatible broadcast. It should be distinguished from general RF detection: detecting a signal does not necessarily provide the same identification information as receiving a Remote ID message.

On-Device Display and Alerts

A 2.4-inch TFT screen with a resolution of 240 × 320 pixels displays the detection list, real-time spectrum, target details, and device settings.

Sound and vibration alerts notify the user of detections, while GPIO provides an external alarm output. Built-in storage supports log recording for subsequent review.

Portable Design and Replaceable Battery

The W10 uses a removable 7.4V, 2800mAh lithium battery. The specified operating time is approximately eight hours per battery at room temperature. Actual runtime varies with operating conditions, and low temperatures can reduce battery endurance.

Type-C charging uses a 5V/1A input, with a stated full-charge time of approximately five to six hours.

The main unit measures 140 × 63 × 41mm without antennas and the belt clip. Including antennas and the belt clip, the dimensions are 360 × 63 × 54mm.

Outdoor Protection and Connectivity

The device is rated IP54 for dust and splash resistance and is not designed for immersion. Its specified operating temperature range is −25°C to +55°C.

Type-C and Bluetooth support firmware updates. Bluetooth also enables data transfer to compatible companion terminals, with supported applications and platforms depending on the supplied software release.

The specification advises avoiding operation near strong RF sources, including radar stations and active jammers, because excessive input power may damage the receiver.

Key Specifications

Learn More About the W10

For the latest datasheet, supported drone models, software availability, and quotation, contact Ladasky with your application requirements.

Email: inquiry@ladaskytech.com
Sales telephone: +86 19865763521
WeChat: +86 13556894640

Technical information is based on specification version 20260914-V1.0. Final specifications and available functions should be confirmed for the supplied version.